Baby, Its Cold Inside! How To Reignite The Flame... on your pilot light
Wall heaters are a popular choice for keeping your living space warm and cozy, especially during the colder months.
These heaters often come with a pilot light, a small flame that ignites the main burner when the heater is turned on. However, if the pilot light goes out, you'll need to know how to relight it safely.
In this guide, we'll walk you through the process of lighting your wall heater's pilot light. Or, check out the video below!
Now, let's dive into the step-by-step process of lighting your wall heater's pilot light:
Step 1: Turn off the remote thermostat and power ON/OFF switch on the control unit at the bottom of the furnace.
Step 2: Locate the Pilot Light and Control Knob
Find the access panel on your wall heater. This is typically a small, hinged door near the base of the unit. Open the access panel to reveal the pilot light and control knob.
Step 3: Set the Control Knob to "Pilot"
Locate the control knob, often marked with "Off," "On," and "Pilot" settings. Turn the control knob to the "Pilot" position. You may need to push it down and then turn it to align it with the pilot position.
Step 4: Depress the Control Knob
Press and hold the control knob in the "Pilot" position. This action allows gas to flow to the pilot light.
Step 5: Ignite the Pilot Light
While still pressing the control knob, push the red reset button all the way and hold in. Continue to hold red reset button in for about (1) minute after the pilot is lit. Keep holding the control knob down for about 30 seconds after the pilot light ignites. This helps ensure the pilot light remains lit.
Step 6: Release the Control Knob
Release the control knob slowly. If the pilot light stays lit, it's a good sign that your wall heater is ready to operate.
Step 7: Turn the Control Knob to "On"
Turn the control knob from the "Pilot" position to the "On" position. This should activate the main burner, and your wall heater will start providing heat. Then, securely close the access panel.
Remember to periodically check your wall heater's pilot light to ensure it stays lit. If the pilot light keeps going out or if you smell gas when attempting to light it, you should contact a qualified technician to inspect and repair your heater.
Safety is paramount when dealing with gas appliances, so always exercise caution and follow the manufacturer's instructions and safety guidelines.
By following these steps and taking the necessary precautions, you can keep your wall heater running efficiently and your living space warm and comfortable throughout the winter months.